National - Sheet Metal Machines, INC.

National Sheet Metal Machines, Inc.

PO Box 72
Smartt, TN 37378
PHONE: (931) 668-3643
FAX: (931) 668-3177

Bench Brakes: 5 Year Warranty - Made in USA

S4816

Simplicity of design allows these brakes to work in the most direct fashion. Easy to set up and operate. Body sections are welded steel plates, with heavy truss rods and braces for longer life and greater strength. These brakes are standard with extension handles, apron stop for repeat bends, and replaceable bushings at points of wear.

	Specifications
Model	U4816	S4816	Stand
Capacity (Yield Strength 30,000 lbs. @ rated capacity)	Mild Steel 16 Gauge 1.6mm Stainless 20 Gauge .9mm	Mild Steel 16 Gauge 1.6mm Stainless 20 Gauge .9mm
Maximum Lift of Beam	1 1/4”/32mm	1 1/4”/32mm
Finger Width	2” 3” 4” 51mm 76mm 102mm
Maximum Depth of Box	4”/102mm
Bending Length	48 1/4”/1226mm	48 1/4”/1226mm
Shipping Weight	500lbs/227kgs 1689 x 965 x 1372mm	470lbs/213kgs 2134 x 965 x 1372mm	100lbs/45kgs
Floor Space			54”x19”x271/4” 1372x483x692mm

<< Back to website...