Mechanical Shears:
5 Year Warranty - Made in USA
All USA made, rugged welded construction. Inch bed scales, accurate table side guages.. Hold Down / Finger guard with non marring urethaneand positive spring actuation. High carbon high chromelong life
tool steel blades. Upper and lower blades are interchangable. Non-metalic gibs,maintenance free self lubricating bearings.
Continuous cycle, single cycle and jog for different needs. Fully guarded safety foot switch, low power consumption. with quite
Operation.
These powerful Mechanical Shears comes Optional with the front operated, manual and digital back guage with two turns
of the handle will travel 32 inches in two seconds.
Optional Accessories:
Front operated power digital
Read out back guage
Front return sheet support
Squaring arm to 4'
Squaring arm 4' to 8'
Squaring arm 8' to 12'
Two front extensions
Work light
|
| |
Specifications |
| Model |
NM410 |
NM610 |
NM810 |
NM1014 |
| Capacity Tensile Strength 55,000 @ rated cap |
Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
|
Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
|
Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
|
Mild Steel
14 Gauge 2 mm
SS 16 Guage
1.6 mm
|
| Strokes Per Minute |
Approx. 40 |
Approx. 40 |
Approx. 40 |
Approx. 40 |
| Cutting Legnth |
49"/1244 mm |
73"/1854 mm |
97"/2464 mm |
121"/3073 mm |
| Shipping Weight |
3600 lbs/1632 kg |
4900 lbs/2223 kg |
6850 lbs/3107 kg |
6100 lbs/2767 kg |
| Floor Space w/ Gauges |
73"x89"x53"
1854x2260x1346 |
92"x89"x53"
2362x2260x1346 |
117"x89"x53"
2972x2260x1346 |
141"x32"x53"
3581x2260x1346 |
| Floor Space w/o Gauges |
73"x28"x53"
1854x711x1346 |
93"x28"x53"
2362x711x1346 |
117"x28"x53"
2972x711x1346 |
141"x32"x53"
3581x813x1346 |
| Motor |
7.5 hp 208 v
240 v
460 v
3 phase |
7.5 hp 208 v
240 v
460 v
3 phase |
7.5 hp 208 v
240 v
460 v
3 phase |
5 hp 208 v
240 v
460 v
3 phase |
